/product/2013-9-9/234.html ER5356-铝焊丝-U宝娱乐_U宝娱乐注册 - U宝娱乐,U宝娱乐注册
铝焊丝

ER5356

详细介绍

使用及存放说明:

   1、产品拆封后,在保质期内你可以直接施焊,不需要任何焊前处理。产品出厂包装密封条件下可保存二年

       以上,拆去包装后在通常大气环境下可保质三个月;

    2、产品应置于通风、干燥及酸、碱、油介质隔离的地方存放;

    3、产品在运输中应避免摔撞和受潮,以免损坏焊丝盘和影响焊丝质量;

    4、焊丝拆去包装后,建议在焊丝上方施加适当的防尘遮盖物;

    5、对于超过保质期的焊丝,建议在焊前进行焊丝表面清理;

    6、焊接过程中的电弧会刺激你的眼睛,请注意保护。

 

铝及铝合金焊丝           Aluminium & Aluminium Alloy welding wires

标准  Classification

GB/T 10858-2008············       HS 331

AWS A5.10··············       ER 5356

焊材化学成分指标 %

 

Typical composition in %

Si··················          0.25

Fe··················         0.40

Cu··················         0.10

Mn·················        0.050.20

Mg···············                4.505.50

Cr·················         0.050.20

Zn··················          0.10

Be···············                      0.0003

Ti················              0.060.20

其余Others···············        0.05

其余总和Others Total··········           0.15

物理性能指标

 

Physical properties

(Approx.Values)

屈服极限 0.2% yield strength Rpo2 (Mpa···        110

拉伸强度 Tensile Strength Rm (Mpa)·····           240

延伸率 Elongation A5 (L0=5d0) (%)·····            17

试验温度 Test Temperature (℃)·····               20

性能特点及用途

 

Performance & Usage

本品为含镁5%的铝合金焊丝,是一种用途广泛的通用型焊材,适合焊接或堆焊5%镁的铸锻铝合金,强度高,可锻性好,抗腐蚀性好。本品能为经阳极化处理的焊接提供良好的配色。

 

This type of product is widely used in general welding material with the Mg of 5%, which can be used in jointing or overlay forging and casting alloys processing. And the product is of high toughness , good forgeability, and well anti-comosiveness.

保护气体

Shielding gas

焊接氩气、氮气、或氩气—氮气混合气体

Argon, Helium, or Argon/Heliummixtures.

规格Φ

Dimensions Φ

盘装焊丝MIGwires (mm)

0.8 ; 0.9 ; 1.0 ; 1.2 ; 1.6 ; 2.0 ; 2.4

 

直条焊丝TIG rodsmm)

1.6 ; 2.0 ; 2.4 ; 3.2 ; 4.0 ; 5.0 ; 6.0

焊丝的包装

Wire Packagings

盘装焊丝 (Mig Wires)

S100/0.5kg 1Lb , S200/2kg , S270-S300/6kg-7kg

直条焊丝 (Tig Rod ) 

5/10kg     ·······     长度length 1000mm

上一篇:ER5183

下一篇:ER5556